PORSCHE BOXSTER RUNNING LIGHTS
Can't find what you need? Try browsing the Accessories or Exploded Diagrams!<-- Try narrowing by car using the menu to the left.
Having the perfect sounding exhaust system that helps gain power is not the easiest task at hand. turbocharged cars do not need any backpressure and ideally perform best with no restriction off of the turbo exhaust outlet. however, this would cause your car to be incredibly loud and not comfortable for daily use. agency power has developed this exhaust system to give Porsche 997 turbo owners a race tone exhaust without the dreaded drone in the 2200-2800 rpm range. the muffler system is designed to keep noise level down inside the cabin but roar at full throttle. the exhaust features high flow 200 cell catalytic converters. the cats work with the factory o2 primary and secondary sensors to not throw a che...(choose a part on the right to read more)
General Fitment 911 2005-08
$2,999.95
Make a selection
Ebc brakes redstuff low dust ceramic rear brake pads Porsche 911 2.0l 64-69
High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.
This material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-cer...(choose a part on the right to read more)
General Fitment 911 1965-69
Ebc brakes redstuff low dust ceramic front brake pads Porsche 911 2.0l 64-69
High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.
This material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-ce...(choose a part on the right to read more)
General Fitment 911 1965-69 911 1970-73 911 1974-77 911 1984-86
Ebc brakes redstuff low dust ceramic rear brake pads Porsche 944 82-87
High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.
This material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-ceramic ...(choose a part on the right to read more)
General Fitment 944 1982-85 944 1985-88
Ebc brakes redstuff low dust ceramic front brake pads Porsche 911 3.3t 92-93
High performance lowest dust rating pads for prestice imports and faster street driving. There are two reasons our customers love redstuff. First because they are the lowest dust pad we have encountered by reducing dust by 60-90%. Plus the minimal dust you see is very easily removed with a simple sponge was as it contains no steel fibre particles as in all other pads. Second they brake like an alligator right from cold (as good as original pads or better) and just get better as they heat up.
This material is a kevlar fibre based brake compound enhanced with ceramic particles. If you have previously tried ebc redstuf (pre-ce...(choose a part on the right to read more)
General Fitment 911 1989-94 911 1994-98 928 1983-86 968 1992-95
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $2,217.60
Make a selection
K-16/24 turbo (up to 555hp) power is focused on low and mid range rpm's. Facts: - modified compressor housing and backing plate - modified & lightened high flow compressor wheels. - remanufactured by kkk / borg warner certified technicians - free software update for those already running FVD software. FVD brombachers 996 k-16/24 remanufactured turbos are created for those who are looking for power that is focused in the low and mid rpm range. They are completely bolt on and do not require custom headers or special modifications. The remanufacturing process starts with re-profiling the OEM turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
From $2,217.60
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- software performs flawlessly on your 95' and 96' model year ecu's ! So you don't have to purchase 97' and newer ecu's which are extremely expensive!
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight fly...(choose a part on the right to read more)
General Fitment 911 1994-98
$3,294.50
Make a selection
K24/26 exchange turbo (only OEM k24 exchange accepted)
(up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compr...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,506.75
Make a selection
K24/26 race turbo (up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This ...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,022.33
Make a selection
FVD Brombacher955 Cayenne turbo tt ihi 16/24 ?700 series? Upgraded turbos.
Specifications:
- new, lightened and larger compressor wheel with extended tip to reduce backpressure. ( 46.5 mm inducer).
- cnc re-profiled compressor housing.
- optimized compressor side gap
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- up to 50% more power compared to the factory turbo?s!
- manufactured by ihi certified technicians.
- free software update for those already running FVD software
Combined with our proprietary software, exhaust, bmc drop in filter, and other engine components you can achieve 700+ crank hp.
General Fitment CAYENNE 2003-06
$4,234.70
Make a selection
K24/26 exchange turbo (only OEM k24 exchange accepted)
(up to 700 hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24/26 race turbos are new units created for those who are looking for ultimate in performance. Power is focused in the mid and top rpm range while keeping turbo lag low. They are completely bolt on and do not require custom headers or special modifications.
The factory OEM turbocharger compressor housing is re-profiled and the compr...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$2,506.75
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
$2,854.50
Make a selection
FVD Brombacher997.1 tt "700 series" upgraded turbos facts: - cnc re-profiled compressor housing and backing plate - new, lightened and larger compressor wheel (12 blades) - reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure. - all new bearings. - all new piston rings and seals. - all parts cleaned, inspected and measured to motorsport specifications. - all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol. - 47.55 mm inducer - 66 mm exducer - flow rate = 37 lbs. / minute or 280g/s - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already runn...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
From $2,644.70
Make a selection
FVD Brombacher957 Cayenne turbo tt ihi ?16/24? ?700 series? Upgraded turbos.
Specifications:
- new, lightened and larger billet compressor wheel with state of the art ?extended tip?. ( 46.5 mm inducer).
- these turbos are the ihi size equivalent to the kkk 16/24 ? As a reference.
- cnc re-profiled compressor housing and backplate.
- optimized clearances.
- re-uses factory vacuum unit (wastegates).**
- up to 50% more power compared to the factory turbo?s!
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- remanufactured by ihi certif...(choose a part on the right to read more)
General Fitment CAYENNE 2011-14 CAYENNE 2007-10
$2,432.70
Make a selection
FVD Brombacher997.1 tt ?700 series? Upgraded turbos
Facts:
- cnc re-profiled compressor housing and backing plate
- new, lightened and larger compressor wheel (12 blades)
- reworked turbine wheel, lightened and optimized for higher flow and reduced backpressure.
- all new bearings.
- all new piston rings and seals.
- all parts cleaned, inspected and measured to motorsport specifications.
- all parts are balanced (static & dynamic) up to 120.000 rpm with balancing protocol.
- 47.55 mm inducer
- 66 mm exducer
- flow rate = 37 lbs. / minute or 280g/s
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for tho...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$6,531.31
Make a selection
FVD Brombacher997.2 tt ?700 series? Upgraded turbos
Facts:
- modified compressor housing for the 3.8 l displacement
- modified & lightened billet compressor wheel with 12 blades
- 49.55 mm inducer
- 68 mm exducer
- remanufactured by borg warner certified technicians
- shaft tolerances are strictly maintained to ensure durability
- free software update for those already running FVD software
We start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2007-09
$3,127.00
Make a selection
FVD Brombacher997.2 tt "700 series" upgraded turbos facts: - modified compressor housing for the 3.8 l displacement - modified & lightened billet compressor wheel with 12 blades - 49.55 mm inducer - 68 mm exducer - remanufactured by borg warner certified technicians - shaft tolerances are strictly maintained to ensure durability - free software update for those already running FVD software we start by re-profiling the OEM vtg turbocharger compressor housing and modifying the compressor backing plate. This is done to replace the factory compressor wheel with a larger 12 blade, modified compressor wheel. The larger wheel is also lightened allows the turbo to flow a larger volume of air (more power), and aids i...(choose a part on the right to read more)
$6,413.00
Make a selection
If you update your car with the 997.2 facelift front bumper with 997.2 led lights, this kit is required in order to make the led's work. With our led module the daytime running lights will be wired for always on , even if you turn on your head lights at night. Optionally, they can be turned off when headlights are on with the addition of FVD 631 997 tled
This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.
Combined with our proprietary software and exhaust (including sport cats) you can achieve 720 crank hp (720 ps) and 693 crank lb.-ft. (940 nm) of torque!
Turbo facts:
- increased velocity & reduced backpressure manifold (header) is included for plug and play installation.
- new, lightened and larger compressor wheels for up to 45% more power than OEM turbo power.
- housings are larger for higher flow and reduced backpressure.
- extremely high quality, German made turbos ensure years of trouble free operation.
- brand new turbos, not remanufactured.
- free software update included for those already running FVD software.
Our turbos are built for every day drivability and reliability that you expect ...(choose a part on the right to read more)
General Fitment PANAMERA 2010-14
$12,575.38
Make a selection
Power gains: + 15 hp & + 13 lb. Ft of torque
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 93)
Please note:
For 1996 model year Porsches please see our part number FVD 993 618 71. You will need to give us the Bosch number and Porsche number off of the ecu prior to sending the ecu to us. The reason is 1996 model year ecu eprom's could only be flash loaded with software one time. To program these units requires the use of a coding socket. A late model ecu (1...(choose a part on the right to read more)
General Fitment 911 1994-98
$1,094.50
Make a selection
Stock:
Engine - 6 cylinder boxer twin-turbo
Capacity - 3600ccm
Compression ratio - 8,5:1
Max. Power - 300kw (408hp) @ 5750rpm
Max. Torque - 540nm (398lbf ft) @ 4500rpm
Max. Speed - 290km/h
Max. Rpm - 6700rpm
Acceleration 0-100km/h - 4.5s
Software tuning:
Max. Power - 324kw (440hp) @ 6000rpm
Max. Torque - 600nm (443lbf ft) @ 4500rpm
Max. Speed - 310km/h
Max. Rpm - 6900rpm
Acceleration 0-100km/h - 4.3s
Highlights:
- all of the factory engine software safety features are fully intact
- customizable for your needs (intakes, lightweight flywheels, bypass - 100 cell - 200 cell exhausts, etc.)
- customizable for octane (please let us know what octane you are running example: europe 98, us 91 or 9...(choose a part on the right to read more)
General Fitment 911 1994-98
$2,194.50
Make a selection
Pagid rs29 is a recent development from the bases of rs19, with a very similar friction coefficient to rs19 with improvements in initial bite offering quicker response and slightly more temperature stable at the upper levels of the temperature range. Developments in raw material selection and compounding have resulted in improvements also in pedal feel and feedback, helping with modulation particularly on lighter applications.
This material provides very good levels of performance and response at all temperature levels, only slight temperature inputs are required to bring the pad up to its optimum performance level. Another favourite with endurance racers having won many classes at all major endurance eve...(choose a part on the right to read more)
General Fitment 911 2009-12
K24 race turbo (up to 575hp)
Power is focused on mid and top range rpm?s.
Facts:
- modified compressor housing and backing plate
- modified & lightened high flow compressor wheels.
- remanufactured by kkk / borg warner certified technicians
- free software update for those already running FVD software.
FVD brombachers 996 k24 race turbos are new units created for those who are looking for power that is focused in the mid and top rpm range. They are completely bolt on and do not require custom headers or special modifications.
The factory k24 OEM turbocharger compressor housing is re-profiled and the compressor backing plate is modified. This is done to replace the factory compressor wheel wit...(choose a part on the right to read more)
General Fitment 911 TURBO/GT2 2001-05
$5,022.03
Make a selection
© 2024 Automobile Atlanta Inc.
505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844
|